The Valley Express will be a High Speed Train
The “T” System is an innovative way to hoist The Valley Express High Speed Train Cars above the Ground. In the Diagram above, you will notice a single vertical steel column with steel beam on sitting on top of that column create a “T” shape. This is an effective way to deliver Four Train Cars on a Single Line. The Bottom of the lower Car will be well above the Ground. In some instances, over 50 feet to allow Agricultural Practices and Urban Planning to continue. In this Early Design Stage, we are proposing that The Valley Express uses a Magnetic Levitation Method for its Train Cars. However, technology does change and we are open to other possibilities as they become more prevalent.
The Train Cars above would be on an Express System, traveling with speeds in access of 300 m.p.h. The Train Cars below would be traveling at less Speeds but still at a rapid rate. These Cars would be used primarily for Commuter Stops and Shuttle Purposes such as the SFO Linking to the San Bruno Station.
Keywords: Stockton, High Speed Train, Rail, CA, Livermore, Tracy, San Francisco, Silicon Valley, Train Station, Train, San Jose, Oakland, California
Contact The Valley Express of the Bay Area:
